Mountable saws
For use in automatic slot machines, cutting units or bundle saws
Cutmaster Basic
€1,350.00*
Lubrication oil tank:
Not specified
|
Motor size:
9,3kW
|
Swivel direction:
to the right
|
Swivel system:
Hydraulical (hydraulic cylinder)
|
Sword length:
Stihl 64cm
Hydraulically driven chainsaw
The Cutmaster Basichas been specially developed for use in cutting devices and firewood harvesters.
The saw can be supplied with various sizes of powerful hydyraulic motors which drive the chain with a cutting speed of 20m/s.
Due to the large selection of sword lengths (54cm to113cm) the Cutmaster Basic can be used very variably. The chain is tensioned by a set screw and lubricated by the integrated lubrication system.
The Cutmaster Basic is equipped with a hdraulic swivel system..
- Integrated chain lubrication- 20 metres/sec cutting speed- chain pitch 0.404".- chain wheel with 14 dents- left-hand and right-hand design- hydraulic swivel device- swivel axis in the motor shaft- robust stainless steel construction
Variants from €1,100.00*
Cutmaster Electronic
€1,600.00*
Motor size:
5KW
|
Swivel direction:
to the left
|
Swivel system:
Hydraulical (hydraulic cylinder)
Electrically driven chainsaw
The Cutmaster Electronic has been specially developed for use in cut-to-length devices and automatic splitting machines.
The saw is available with powerful electric motors from German manufacturers in various sizes, which drive the chain at a cutting speed of 20 m / s.
The chain is tensioned by a set screw and lubricated by the integrated lubrication system.
The Cutmaster Elektro is equipped with a hydraulic swivel system.
- Integrated chain lubrication- 20 m/sec cutting speed- chain pitch 0.404".- AC motors made by German manufacturers- Chainwheel with 16 dents- By means of frequency converters you can increase the speed- Hydraulic swivel device- Swivel axis in the motor shaft- Robust design
Variants from €900.00*
Cutmaster Speed
€2,335.23*
Lubrication oil tank:
Not specified
|
Motor size:
6ccm
|
Swivel direction:
to the right
|
Sword length:
Iggesund 54 cm
Hydraulically driven chainsaw
The Cutmaster Speed has been specially developed for use in cutting devices and firewood harvesters.
The saw can be supplied with a powerful Parker axial piston motor, two sizes of which are available. This motor drives the chain with a cutting speed of up to 60 metres/s.
Motor size 6ccm: 50 KW – 67 litres/min (at 400bar)
Motor size 10ccm: 85 KW – 110 litres/min (at 400bar)
While the motors do not have to be driven with a 400 bar pump, please bear in mind that in case of a 200 bar pump, only half the capacity can be reached while the speed remains unchanged.
Due to the large selection of sword lengths (54cm to 135cm), the Cutmaster Speed can be used very variably. The chain is tensioned by a set screw and lubricated by the integrated lubrication system.
The Cutmaster Speed is equipped with a hdraulic swivel system.
- Integrated chain lubrication- 40 metres/sec cutting speed- chain pitch 0.404".- chain wheel with 13 dents- left-hand and right-hand design- hyraulic swivel device- swivel axis in the motor shaft- robust stainless steel construction
- Axial piston motor with 10,000 rpm
- loadable up to 400bar
Variants from €1,150.00*