Grapple saw Cutmaster Basic The grapple saw may be attached to different grippers on excavators, cranes or front loaders. For this purpose, three different sizes are available. The saw as well as the lubrication oil tank are mounted in the blade protection which can be attached to your gripper via oblong holes. The size of the sword protection is adjusted to the length of your blade. Should you wish to mount a longer sword, this is possible. The blade then protrudes from the front of the protection. The saw is equipped with a powerful 9.3 kW hydraulic motor which drives the chain to a cutting speed of 20.3 metres/s. At full speed the motor requires 31.5 litres of hydraulic oil per minute.   Upon request also available with other engine sizes. 6 KW (21 litres/min)9.3 KW (31.5 litres/min)14.4 KW (50.4 litres/min)Available blade lengths:54cm64cm75cmThe insert length is the sword length - 10cm Scope of Supply: - Cutmaster Basic (with the chosen motor size) - Blade protection adjusted to the chosen blade length - 1 blade - 1 chain

Grapple saw Cutmaster Speed The grapple saw may be attached to different grippers on excavators, cranes or front loaders. For this purpose, three different sizes are available. The saw as well as the lubrication oil tank are mounted in the sword protection which can be attached to your gripper via oblong holes. The size of the sword protection is adjusted to the length of your blade. Should you wish to mount a longer sword, this is possible. The blade then protrudes from the front of the protection. The saw can be supplied with a powerful Parker axial piston motor, two sizes of which are available. This motor drives the chain with a cutting speed of up to 60 m/s.   Size of motor 6ccm: 50 KW – 67 litres/min (at 400bar) While the motors do not have to be driven with a 400 bar pump, please bear in mind that in case of a 200 bar pump, only half the capacity can be reached while the speed remains unchanged. Available sword lengths:54cm64cm75cmThe insert length is the sword length -10cm   Scope of supply: - Cutmaster Speed (with the chosen motor size) - Blade protection suitable for the chosen blade length - 1 blade - 1 chain