Grapple saw Cutmaster Speed

Hombach Forsttechnik

€2,444.57*

Prices excl. VAT plus shipping costs

Available in 1 Tag

Blade protection size

For a sword measuring 54 cm

For a sword measuring 64 cm

For a sword measuring 75 cm

Motor size

6ccm

10ccm

Product number: SW10025.1

Product information "Grapple saw Cutmaster Speed"

Grapple saw Cutmaster Speed

The grapple saw may be attached to different grippers on excavators, cranes or front loaders. For this purpose, three different sizes are available.

The saw as well as the lubrication oil tank are mounted in the sword protection which can be attached to your gripper via oblong holes.

The size of the sword protection is adjusted to the length of your blade. Should you wish to mount a longer sword, this is possible. The blade then protrudes from the front of the protection.

The saw can be supplied with a powerful Parker axial piston motor, two sizes of which are available. This motor drives the chain with a cutting speed of up to 60 m/s.

Size of motor 6ccm: 50 KW – 67 litres/min (at 400bar)

While the motors do not have to be driven with a 400 bar pump, please bear in mind that in case of a 200 bar pump, only half the capacity can be reached while the speed remains unchanged.

Available sword lengths:
54cm
64cm
75cm
The insert length is the sword length -10cm

Scope of supply:

- Cutmaster Speed (with the chosen motor size)

- Blade protection suitable for the chosen blade length

- 1 blade

- 1 chain

manufacturer
HomTec GmbH
Unterm Gallenlöh 12
57489 Drolshagen
info@m-hombach.de

Accessory Items

Micro throttle valve

Micro throttle valve The micro throttle valve is perfectly suitable wherever precise control is required for small volume flows.The integrated non-return valve throttles the volume flow from 'A' to 'B', while there is free flow from 'B' to 'A'. Connections: G1/8" The throttle is used to adjust the swing speed of the saw.

€44.54*

Pressure reducing valve

Pressure reducing valve Functionality Once the pressure in 'U' is reached, the valve blocks the passage between 'E' and 'U' to keep the pressure 'U' constant.If the pressure in 'U' is exceeded, it can be relieved via 'Dr'. This does not influence the upstream pressure in 'E'. Since it is a single-acting valve, it allows a free oil return from 'U' to 'E' Adjustment range from 5 to 50 bar. Connections: G3/8" The pressure reducing valve is used to adjust the pressure on the swing cylinder.

€183.87*

Chain wheel sprockets

Chain wheel sprockets Available in various pitches Pitch 12, 13, 14, 15, 16 Pitfch 14 is the standard in our Cumaster Basic. Pitfch 14 is the standard in our Cumaster Speed. Pitfch 14 is the standard in our Cumaster Electro. The chain sprockets all have a pitch of 404 and a 25 mm borehole with featherkey notches.

From €48.18*

Details